Category: time-lapse

Monument Valley Time-lapse

Images from Monument Valley, Arizona

On my recent trip to the Southwest, we stopped in Monument Valley for one night, too short of a time but that’s all the time we had. We stayed at The View Hotel on the Navajo Reservation which overlooks the Mitten and valley. Perfect location and many rooms have open porches for sky watching. Perfect! I set up two cameras for time-lapse. The main camera, a Canon 5D IV with the 16-35mm lens and another 5D IV with the 28-105 lens. I used the Pulse intervalometer by Alpine Labs for the timelapse.

The technical side. The camera with the 16-35mm lens was the main camera which did both nighttime star timelapses. It was set at ISO 2000 and f2.8 at 20 second exposures. The exposures were done every 30 seconds. The first timelapse in the film took 2 hours and 56 minutes to produce. I’ve seen people using higher ISO’s but haven’t done that yet to se how much noise there might be in the shots. These exposures were about 1 stop too dark. I lightened them among other adjustments in Lightroom. I also adjusted the kelvin temperature from 5500, down to 4500, to bring out the blue and blackness of the sky.

The timelapse of sunrise was done on the second camera with shots every 2 seconds with the settings ISO 100, F11 and shutter ranging from 1/13th to 1/40th of a second. If you look closely, you can see the wind blowing dust and a few small dust devils across the ground. By the time we had to leave there was a dust storm a brewing and it was hard to see the valley.

In post processing the timelapse I use the plugin from Timelapse+ Studio in Lightroom to create the key exposures and then make adjustments to these images and have the plugin adjust the images evenly across the length of each timelapse video.

One great thing with timelapse is if you are shooting from a hotel balcony you can fall asleep while it is playing out! OK, I woke up several times to check things which was good as the Milky Way was rising farther south than I thought even with the star apps I have to calculate it before a shoot. When I started the clouds looked like it could either get overcast or stay partly cloudy. One of those times it will work or not – but if you don’t go ahead and shoot it you can’t get it back!

Images from Monument Valley, Arizona

I hope you enjoy the still images and the video! If you have any questions just ask!

Cheers,

Richard

#monumentvalley #richardmackphoto #nature #timelapse #timelapseplus #astrophotography #Canon5D4 #canon #natgeoyourshot #natgeo #stars #nightsky #milkyway #milkywayphotography #alpinelabs #alpinepulse


Vernal Equinox Sunrise 2021

My birthday is always either the last day of winter or more often the first day of spring – the vernal equinox. So this year I decided to go on down to my favorite beach on Lake Michigan and capture the sun rising on this first spring morning. I had one camera set up for a low wide angle time-lapse and 4K video with a 600mm lens. Once you have captured the sunrise you have some time to shoot a few other shots to use. You can never have enough shots to use!

The time-lapse camera was using Timelapse+ app which does a great job of changing the exposures smoothly when combined with its software and Lightroom to make final adjustments for a smooth transition seamless. Both camera’s are Canon 5D Mark IV’s the wide angle lens is the 16-35mm. The 600 lens was a combination of the Canon 300 and the 2x convertor. OK, enough geekdome. Enjoy! Richard

#thesweetwaterseas #greatlakes #lakemichigan #freashwater #equinox #canon5D4 #timelapse+view #richardmackphoto


Sunrise Time-Lapse from Lighthouse Beach

Sometimes you realize you just need to go and do something. The other morning I awoke at 5am and realized it was time to get down to the beach and try out the Timelapse+ intervalometer on a night to day time-lapse and see if it worked. I’ve had this piece of equipment for awhile and had trouble getting it to connect witht my Canon 5D Mark IV. I tested it several times and it has been working so time to get out and try a real time-lapse! Besides it is November in Chicago and almost 60 degrees at 5am – clearly one of the last mornings to try it while still not freezing cold out there!

After getting the camera and equipment together I was on the beach just before 6am, slightly later than I wanted. I started the time-lapse and stood back and just watched the waves, clouds and sun while still below the horizon light up the sky. I also used the app The Photographers Ephemeris which helps you determine the angles of the sun, moon and stars for a particular location and date. I use it to double check where the sun will pop out on the horizon.

While the time-lapse is continuing for 56 minutes I walked a bit of the beach, used another camera to shoot some of the waves and different shots I saw, but mostly watched the sunrise and the serenity of the clouds and sun as it danced higher into the sky. Not a bad morning.

Hope you enjoy this 40 second time-lapse!

Cheers, Richard Mack


Chicago Skyline Time-lapse

I did my first real test of the of the “holy grail” of time-lapse where you go from daylight to night-time (or the reverse). I used the Timelapse+ VIEW intervalometer and software plugin for Lightroom CC to handle the exposure changes. I did this from the Montrose Harbor area looking down to Chicago, an iconic view of this beautiful city. We started the exposures at 6:40pm and finished 2 hours and 44 minutes later at 9:24pm. This gave us just under a minute of video from the 1,408 images shot. For those interested it was shot with the Canon Mark 5d IV with the 24-105 lens set at F/11. The ISO started at 100 and ended at ISO 8000. The shutter speed started at 1/80 of a second and ended with an exposure of 4.0 seconds. A total of 14.5 stops! Timelapse+ VIEW was setup to change the shutter speed first and then the ISO. Timelapse+ VIEW Intervalometer will automate night to day time-lapse using a light sensor and advanced algorithms. This system worked really well and once you take it into Lightroom in post processing the plugin finds the keyframes which you can use to do the initial processing in Lightroom Development window to make any exposure / color corrections you require. The software then makes these corrections for the entire selection in subtle increments so you have a finished piece with smooth transitions for a beautiful time-lapse.

Now one thing I know I will try next time is starting with at least a 1 second exposure to make the water smoother throughout the time-lapse. I would also go longer into the nighttime view to give a little more room in editing to be able to use a longer nighttime scene.

This Timelapse+ VIEW intervalometer and what we will be able to do with it will be a great addition to The Sweetwater Seas – North America’s Great Lakes documentary! It will be in the equipment bags for every shoot from now on! Can’t wait to get outside along  the Great Lakes and do some day to night with the Milky Way winding its way across the screen, and maybe even back to daylight.

Enjoy,

Richard

#thesweetwaterseas #GreatLakes #timelapse #timelapse+ #Chicago #LakeMichigan #Canon #CanonMark5DIV #Chicagophotography #artofchi #earthpix #timelapseplus #travel #landscape #cityscape #astrophotography #illinois #illinoistourism #way2ill